HOW TO APPLY DJI PHANTOM 4 DRONE SKINS

Looking to learn how to apply your new DJI Phantom 4 Skins by Skinit?

Follow the instructions listed below in order to properly and accurately apply your new Skinit DJI Phantom 4 skin.

Dock Front

Step 1: Place decal "A" on the indicated face, using the top two corners to line it up.

Step 2: Place decal "B" and "C" on face as shown using corners to line it up.

Step 3: Place decal "D" on face as shown using either edge to align. Place decal "E" using the corners and cut out section to align.

Dock Back

Step 1: Place decal "F" on indicated face, using the corners and sections of the cutout to it up.

Step 2: Place decal "G" on face as shown using the USB cutout as reference for alignment.

Step 3: Place decal "H" and "I" on indicated face using edge for alignment.

Console Front

Step 1: Place decal "J" on to console using the screen to align on face as shown.

Console Back

Step 1: Place decal "K" on to console using the cutouts to align on face as shown.

Step 2: Place decal "L" on to console stand as shown.

Controller Front

Step 1: Place decal "M" on to left controller as indicated, using the shaped cutouts to align, repeat on right controller with decal "O"

Step 2: Place decal "N" to center of controller as shown, using the square cutouts to align.

Step 3: Place decal "P" on to controller as shown grip face as shown, using cutouts to align it. 

Controller Back

Step 1: Place decal "Q" on indicated face using circular cutouts to align.

Step 2: Place decal "R" on indicated face using circular cutouts to align.

Step 3: Place decal "S" on to controller grip face as shown, using cutouts to align it.

Please see the attached PDF for application instructions for applying skins to the Phantom 4. For further questions or concerns, please contact our customer service team at support@skinit.com.